Industry news-Shengzhou Fuli Electric Co., Ltd.

富利电器

图片名称

Language
- English
- 中文

Home page

Analysis of the machining plan and machining method of the motor end cover

Analysis of the machining plan and machining method of the motor end cover

The main frame of the integrated motor, the end cover processing process looks very simple, basically the lathe drill is often a hole. But in fact, motor faults such as noise, rotation, and abnormal vibration are often directly related to the machining accuracy of the motor end cover.

2022/04/27

The role of the motor end cover

Motor end cover: It is the cover of the motor casing. Generally divided into front cover and rear cover, used to fix and support the motor shaft.

2022/04/27

How to operate the spray repair of the bearing chamber of the motor end cover

The motor end cover is a back cover installed behind the casing of the motor, etc., and is often ignored by equipment managers. However, when the bearing chamber of the motor end cover is worn, if it is not repaired in time, it will cause damage to the operation of the entire motor equipment. Influence.

2022/04/27

Technical requirements for the production of motor end caps

The dimensional accuracy, roundness and surface roughness of the cracks must meet the pattern requirements.

2022/04/27

How to remove the motor end cover

1. In order to avoid mistakes during assembly, mark the joint between the casing and the end cover before removing the end cover.

2022/04/27

How to choose the accuracy grade of the motor end cover and the type of fit

The inner diameter of the bearing matched with the rolling bearing adopts the 7-level precision;

2022/04/27

Types and technical requirements of motor end caps

The motor end cover is a structural part connecting the rotor and the base. On the one hand, the inside of the motor is protected, and on the other hand, the relative position of the stator and the rotor is ensured by the rolling shaft placed in the end cover of the motor.

2022/04/27

Are the front and rear end caps of the motor the same as the bearing clearance?

The motor generally has a fixed bearing at one end and a floating at the other end. The front end is a fixed end, the rear end is a floating end, and the spring is a wave spring, which is mainly used to preload the bearing to ensure the correct installation of the bearing and improve the service life.

2022/04/27

The intersection of Xihutou Village, Jiao Town, Ganlin Town, Shengzhou City, Shaoxing City, Zhejiang Province

Email

59725732@qq.com

Telephone
+575-3064513

Mr. Pan

+86 13858469325

图片名称

Shengzhou Fuli Electric Co., Ltd.

图片名称

Scan the code to follow

Company Profile

Product category

Induction motor end cap

Plastic motor end cap

DC motor end cap

图片名称

Copyright © Shengzhou Fuli Electric Co., Ltd.

京ICP备10002622号-38

豫公网安备 33号